OD(mm):14-1016
WT(mm):2-120
Grade:Gr.6,Gr.3,Gr.8 etc.
End:Plain End, Beveled End, Treaded
Standards:ASTM A333，ASME SA333，NACE MR 0175
Additional Testing： HIC TEST, SSC TEST
OD(mm):14-1016
WT(mm):2-120
Grade:B,C
Standard:ASTM A106,ASME SA106 ,NACE MR 0175 or ISO 15156
End:Plain End, Beveled End, Treaded
Applications:Use for power plants, boilers, petrochemical plants, oil and gas refineries, and ships where the piping must transport hot or cold liquids and gases under high pressures and temperatures.
OD(mm):10.3-114.3
WT(mm):1.73-13.49
Grade:A179/SA179
Standard:ASTM A179/A179M,ASME SA179/SA179M
Surface Finishes:Oil-dip, varnish, Passivation, phosphating, Shot Blasting
End Finishes: Beveled, Square Cut, Threaded & Coupled.
OD(mm):14-1016
WT(mm):2-120
Grade:A192/SA192
Standard:ASTM A192,ASME SAI92
End:Plain End, Beveled End, Treaded
OD(mm):14-1016
WT(mm):2-120
Grade:A-l,C
Standard:ASTM A210/210M,ASME SA210/SA 210M
End:Plain End, Beveled End, Treaded
OD(mm):14-1016
WT(mm):2-120
Grade:T2,T5,T11,T12,T22,T91
Standard:ASME SA210/SA 210M
Usage：Seamless Ferrite and Austenite Alloy Steel Pipe used for Boiler, Superheater and Heat Exchanger
OD(mm):14-1016
WT(mm):2-120
Grade:St35.8,St45.8,15Mo3,13CrMo44,10CrMo910
Standard:DIN 17175
Usage：Seamless Steel Pipe made by Heat-resistant Steel
OD(mm):14-1016
WT(mm):2-120
Grade:P1,P2,P11, P12,P22,P23,P36,P5,P9, P91,P92 etc.
Standard:ASME SA335/SA335M
Usage：Seamless Ferrite Alloy Nominal Steel Pipe applied for High Temperature
OD(mm):14-1016
WT(mm):2-120
Grade:P195GH,P235GH,P265GH,13CrMo4-5,10CrMo9-10,15NiCuMoNb5-6-4,X10CrMoVNb9-1 etc.
Standard:EN10216
Usage：Seamless Steel Pipe for Pressure Application
OD(mm):14-1016
WT(mm):2-120
Grade:T1,T1a,T1b
Standard:ASME SA-209/SA-209M
Usage：Seamless Carbon Molybdenum Alloy Pipe used for Boiler and Superheater
OD(mm):14-1016
WT(mm):2-120
Usage:Pipe used for Petroleum Cracking
Grade:20,12CrMo,15CrMo,12Cr2Mo,12Cr1MoV,12Cr5MoI,12Cr5MoNT,12Cr9MoI,12Cr9MoNT
Standard:GB 9948
Usage:Pipe used for High Pressure Chemical Fertilizer Equipment
Grade:20,Q345B,Q345C,Q345D,Q345E,12CrMo,15CrMo,12Cr2Mo,12Cr5Mo.10MoWVNb
Standard:GB 6479
OD(mm):38-1016
WT(mm):3.5-120
Grade:37Mn,34CrMo4,35CrMo,30CrMnSiA,30CrMo/4130X,4142
Standard:GB/T18248,GB/T28884
OD(mm):14-1016
WT(mm):2-120
Grade:20G,25MnG,15MoG,15CrMoG,12Cr1MoVG,12Cr2MoG,15Ni1MnMoNbCu,10Cr9Mo1VNbN
Standard:GB5310
OD(mm):14-1016
WT(mm):2-120
Grade:STPG370,STPG410
Standard:JIS G3454
End:Plain End, Beveled End, Treaded
Applications:Carbon Steel Pipes for Pressure Service
中文
English
Русский
